New Holland TV6070

New Equipment / New Holland Ag / Tractors & Telehandlers / Bidirectional Tractor / TV6070

TV6070

Bidirectional Tractor

Features
Specs
Get A Quote
Send To A Friend

When your operation demands extreme versatility, choose the unmatched TV6070 Bidirectional™ tractor. The flexibility to mount and power implements on either end of the tractor provides the best combination of visibility, traction and weight balance. You’ll enjoy extraordinary productivity with this versatile “tool-carrier” tractor.

Model	TV6070
3-Point Hitches
Type	Category II, flex link ends and sway links
Controls	Electronic position control, auto and manual modes
Standard cab end Lift capacity @ 24" behind links, lbs. (kg)	6,500 (2950)
Optional cab end Lift capacity @ 24" behind links, lbs. (kg)	8,700 (3950)
Optional engine end Lift capacity @ 24" behind links, lbs. (kg)	4,000 (1800)
Axles and Brakes
Axle type	HD flange with inboard planetary reduction
Differential lock, cab end	Standard
Differential lock, engine end	Optional
Oscillation, degrees	10
Brake type	Wet disc in cab-end axle, hydraulic actuation
Total brake area, in² (cm²)	507 (3271)
Parking brake	Cable actuation of service brakes
Cab
Type	2-Door ROPS/FOPS
Tinted safety glass, area, ft² (m²)	61 (5.67)
Climate control	Pressurizer, heater/defroster, air conditioning
Fan	3-speed
Seat	Air suspension, 7 comfort adjustments
Turnabout™ console	210 degree rotation to face either driving direction
Drawbars
Type	3-position adjustable, swinging
Cab end	Standard
Engine end	Optional
Electrical
Type	12v negative ground
Batteries	Two group 31 low maintenance
Cold start rating, each, CCA	950
Alternator, amps	120
Engine
Make/model	FPT
Type	6-cylinder parent bore diesel
Fuel Injection	Bosch mechanical pump, direct injection
Bare engine power, HP (kw)	155 (116)
Rated speed, RPM	2,200
Idle speed, RPM	850-950
Displacement, cu. in. (L)	6 / 411 (6 / 6.7)
Aspiration	Turbocharged/air-air intercooled
Air cleaner	Dual element dry with aspirated spin tube precleaner
Cold start aids	Grid heater/coolant block heater
Bio diesel compatibility	Up to 100%
Hydraulic Systems
Standard system-type
Type	CCLS with piston pump
Total flow @ 2200 engine RPM, GPM (LPM)	29.5 (111)
Pressure compensator, PSI (Bar)	3,000 (207)
Remote valves-standard cab end	3
In-cab flow controls	3
Valve actuation	Hand levers, foot pedals
Remote valves-optional engine end	2
Valve actuation	Hand levers
Couplers	1/2" ISO, 2 for each valve
Optional auxiliary hydraulics
Type	CCLS with piston pump; electronic flow control
Maximum flow @ 2200 engine RPM, GPM (LPM)	35 (133)
Pressure compensator, PSI (Bar)	4350 (300)
Couplers	3/4" ISO, with 1/2" case drain
PTO Systems
Type	Mechanical 540/1000 RPM
Shafts	Interchangeable 1 3/8" diameter
Engagement	Electro-hydraulic
Locations- cab end	Standard
Locations- engine end	Optional
Rated PTO
Rated PTO power, HP (kw)	105 (78)
Refill Capacities
Fuel tanks, gal. (L)	55 (208)
Engine oil, gal. (L)	5 (19)
Engine coolant, gal. (L)	7.25 (27)
Hydraulic system/rear axle, gal. (L)	13.5 (51)
Front axle, gal. (L)	6.5 (25)
Steering
Type	Hydrostatic power
Articulation angle	45 degrees maximum
Curb clearance circle ft. in. (m)	32' 10" (10.0)
Transmission
Type	Multi-range closed-loop hydrostatic
Pump	Variable displacement, mechanical operator control
Motor	Electronically controlled 8-range variable displacement
Ground speeds in ranges, MPH (KPH)
1	0 to 6.7 (10.8)
2	0 to 7.7 (12.4)
3	0 to 8.3 (13.4)
4	0 to 9.1 (14.6)
5	0 to 10.3 (16.6)
6	0 to 11.6 (18.7)
7	0 to 16.2 (26.0)
8	0 to 19.5 (31.4)
Braking	Dynamic braking by moving lever to neutral position

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.