Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland Discbine® 313 (flail)
Discbine® 313 (flail)
Discbine Disc Mower-Conditioners
THE DEFINITION OF DISC MOWER-CONDITIONERS
Even in tough conditions, a genuine Discbine disc mower-conditioner swiftly turns heavy crop into fast-drying windrows or swaths. An extensive model lineup provides you with numerous reliable choices. From the economical seven-disc models with a modest, nine-foot cut up to the highly productive 10-disc models that quickly knock down sixteen-foot with every pass, there’s a model that’s suitable for your acreage and operation.
| Model | Discbine® 313 (flail) |
| New Holland-Disc Cutterbar | |
| Type | MowMax™ II True Modular Disc Cutterbar |
| Width of Cut, ft. in. (m) | 13' 0" (4) |
| Number of discs | 8 |
| Number of knives | 16 (2 per disc) |
| Disc Speed, rpm | 2,250 |
| Cutting angle | 2 to 10 degrees |
| Hydraulic Cutting angle control | |
| Standard Cutting height skid shoe, in. (mm) | 0.79-2.07 (20-69) |
| Fixed Raised, high-stubble skid shoe | .79-5.75 (20- 146) |
| Adjustable Raised, high-stubble skid shoe | 3-5.5 (76 - 140) |
| BioMass skid shoe | 5-7.75 (127- 197) |
| Ground clearance with header fully raised, in. (mm) | 16.2" (411) |
| Cutterbar Flotation | Vertical and lateral, adjustable springs |
| QuickMax™ Knife Change System | |
| ShockPro™ Disc Drive Hub protection system | |
| MowMax™ 3-year cutterbar protection plan | |
| Chevron-Design Roll Conditioner | |
| Chevron-Design Roll Conditioner | |
| Type. | Choice of molded rubber or steel rolls |
| Roll Length, in. (mm) | 125 (3175) |
| Roll Diameter, in. (mm) | 10.4 (264) |
| Roll Drive | 4 HB V-belt and enclosed gears |
| Roll Speed, rpm | Two-Speed: 750 or 640 |
| Roll Pressure System | Torsion Bar |
| Conditioner Intensity Adjustment | Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
| LeaningEdge™ Flail Conditioner | |
| LeaningEdge™ Flail Conditioner | |
| Number of LeaningEdge flails | 120 |
| Semi-Swinging LeaningEdge flail design | |
| Rotor Diameter, in. (mm) | 22 (560) |
| Standard Speed, rpm | 1042 |
| Optional Slow Speed, rpm | 752 |
| Drive. | 4 HB V-belt |
| Conditioner Intensity Adjustment. | Single crank adjustable rotor hood |
| Optional Textured Hood Liner Kit | |
| Attachment | |
| Standard Drawbar | - |
| Drawbar Swivel Hitch | |
| 2-pt Swivel Hitch | |
| Dimensions | |
| Height, Transport, ft. in. (m) | 7' 5" (2.26) |
| Height, Operating, ft. in. (m) | 6' 7" (2.01) |
| Width, Transport, ft. in. (m) | 13' 4" (4.04) |
| Width, Operating, Std. Drawbar Hitch, ft. in. (m) | - |
| Width, Operating 2-pt Swivel Hitch, ft. in. (m) | 21' 3" (6.5) |
| Width, Operating Drawbar Swivel Hitch, ft. in. (m) | 19' 7'' (6.0) |
| Length, Transport, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Transport, 2-pt Swivel Hitch, ft. in. (m) | 27' 5'' (8.4) |
| Length, Transport, Drawbar Swivel Hitch, ft. in. (m) | 26' 5" (8.1) |
| Length, Operating, Standard Drawbar Hitch, ft. in. (m) | - |
| Length, Operating, 2-pt Swivel Hitch, ft. in. (m) | 23' 0'' (7.0) |
| Length, Operating Drawbar Swivel Hitch, ft. in. (m) | 22' 0'' (6.7) |
| Weight, Operating lbs. (kg) | 6,275 (2846) |
| Drive | |
| Drive | 1000 rpm PTO, enclosed gears and four HB belt |
| Drive Protection | |
| Drive Protection | Slip clutch and over-running clutch |
| Hydraulics | |
| Hydraulic swing | Standard (double-acting cylinder) |
| Operating Position | Center-Pivot, Right or Left Side |
| Hydraulic lift | Standard (operated by two single-acting cylinders; master/slave) |
| Hydraulic tilt | Standard (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge | |
| Swath, ft. (mm) | 10 (3000) |
| Windrow, ft. (mm) | Adjustable from 3 to 8 (914 to 2400) |
| Wide Thin Fin Kit (100 % Coverage) | - |
| Speeds | |
| Operating, mph (kph) | 0 to 9 (0 to 14.5) |
| Transport, mph (kph) | 20 (32) |
| Tractor Requirement | |
| Tractor Requirement | 90 PTO hp (67 kW) or greater with standard ASAE Category II or III drawbar. |
| Hydraulic valves | All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
| Tubeless Ag Rib Implement Tires | |
| Size | 12.5L x 15 8PR |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide