Model |
Discbine® 316 (roll) |
New Holland-Disc Cutterbar |
|
Type |
MowMax™ II True Modular Disc Cutterbar |
Width of Cut, ft. in. (m) |
16' 3'' (4.95) |
Number of discs |
10 |
Number of knives |
20 (2 per disc) |
Disc Speed, rpm |
2,250 |
Cutting angle |
2 to 10 degrees |
Hydraulic Cutting angle control |
|
Standard Cutting height skid shoe, in. (mm) |
0.79-2.07 (20-69) |
Fixed Raised, high-stubble skid shoe |
.79-5.75 (20- 146) |
Adjustable Raised, high-stubble skid shoe |
3-5.5 (76 - 140) |
BioMass skid shoe |
5-7.75 (127- 197) |
Ground clearance with header fully raised, in. (mm) |
16.2" (411) |
Cutterbar Flotation |
Vertical and lateral, adjustable springs |
QuickMax™ Knife Change System |
|
ShockPro™ Disc Drive Hub protection system |
|
MowMax™ 3-year cutterbar protection plan |
|
Chevron-Design Roll Conditioner |
|
Chevron-Design Roll Conditioner |
|
Type. |
Choice of molded rubber or steel rolls |
Roll Length, in. (mm) |
125 (3175) |
Roll Diameter, in. (mm) |
10.4 (264) |
Roll Drive |
4 HB V-belt and enclosed gears |
Roll Speed, rpm |
Two-Speed: 750 or 640 |
Roll Pressure System |
Torsion Bar |
Conditioner Intensity Adjustment |
Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
LeaningEdge™ Flail Conditioner |
|
LeaningEdge™ Flail Conditioner |
|
Number of LeaningEdge flails |
120 |
Semi-Swinging LeaningEdge flail design |
|
Rotor Diameter, in. (mm) |
22 (560) |
Standard Speed, rpm |
1042 |
Optional Slow Speed, rpm |
752 |
Drive. |
4 HB V-belt |
Conditioner Intensity Adjustment. |
Single crank adjustable rotor hood |
Optional Textured Hood Liner Kit |
|
Attachment |
|
Standard Drawbar |
- |
Drawbar Swivel Hitch |
|
2-pt Swivel Hitch |
|
Dimensions |
|
Height, Transport, ft. in. (m) |
7' 5" (2.26) |
Height, Operating, ft. in. (m) |
6' 7" (2.01) |
Width, Transport, ft. in. (m) |
16' 7" (5.05) |
Width, Operating, Std. Drawbar Hitch, ft. in. (m) |
- |
Width, Operating 2-pt Swivel Hitch, ft. in. (m) |
25' 7" (7.8) |
Width, Operating Drawbar Swivel Hitch, ft. in. (m) |
19' 7'' (6.0) |
Length, Transport, Standard Drawbar Hitch, ft. in. (m) |
- |
Length, Transport, 2-pt Swivel Hitch, ft. in. (m) |
32' 0'' (9.7) |
Length, Transport, Drawbar Swivel Hitch, ft. in. (m) |
31' 0'' (9.4) |
Length, Operating, Standard Drawbar Hitch, ft. in. (m) |
- |
Length, Operating, 2-pt Swivel Hitch, ft. in. (m) |
26' 7'' (8.1) |
Length, Operating Drawbar Swivel Hitch, ft. in. (m) |
25' 7'' (7.8) |
Weight, Operating lbs. (kg) |
6,700 (3039) |
Drive |
|
Drive |
1000 rpm PTO, enclosed gears and four HB belt |
Drive Protection |
|
Drive Protection |
Slip clutch and over-running clutch |
Hydraulics |
|
Hydraulic swing |
Standard (double-acting cylinder) |
Operating Position |
Center-Pivot, Right or Left Side |
Hydraulic lift |
Standard (operated by two single-acting cylinders; master/slave) |
Hydraulic tilt |
Standard (operated by single-acting cylinder and incorporated into the lift system) |
Material Discharge |
|
Swath, ft. (mm) |
10 (3000) |
Windrow, ft. (mm) |
Adjustable from 3 to 8 (914 to 2400) |
Wide Thin Fin Kit (100 % Coverage) |
- |
Speeds |
|
Operating, mph (kph) |
0 to 9 (0 to 14.5) |
Transport, mph (kph) |
20 (32) |
Tractor Requirement |
|
Tractor Requirement |
100 PTO hp (75 kW) or greater with standard ASAE Category III drawbar. |
Hydraulic valves |
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
Tubeless Ag Rib Implement Tires |
|
Size |
12.5L x 15 8PR |