| Model |
H7230 |
| New Holland-Disc Cutterbar |
|
| Type |
MowMax™ True Modular Disc Cutterbar |
| Width of Cut, ft. in. (m) |
10' 4" (3.2) |
| Number of discs |
8 |
| Number of knives |
16 (2 per disc) |
| Disc Speed, rpm |
3000 |
| Cutting angle |
2 to 10 degrees |
| Hydraulic Cutting angle control |
Standard |
Standard Cutting height
skid shoe, in. (mm) |
Standard 0.95 to 3.2 (24 to 81) |
Fixed Raised, high-
stubble skid shoe |
Optional 2.25-4.5 (57-114) |
Adjustable Raised, high-
stubble skid shoe |
- |
| BioMass skid shoe |
- |
Ground clearance with
header fully raised, in. (mm) |
18" (457) |
| Cutterbar Flotation |
Vertical and lateral, adjustable springs |
QuickMax™ Knife
Change System |
- |
ShockPro™ Disc Drive
Hub protection system |
Standard |
MowMax™ 3-year
cutterbar protection plan |
Standard |
| Chevron-Design Roll Conditioner |
|
| Chevron-Design Roll Conditioner |
Standard |
| Type |
Choice of molded rubber or steel rolls |
| Roll Length, in. (mm) |
102 (2591) |
| Roll Diameter, in. (mm) |
10.4 (264) |
| Roll Drive |
4 HB V-belt and enclosed gears |
| Roll Speed, rpm |
635 |
| Roll Pressure System |
Torsion Bar |
Conditioner Intensity
Adjustment |
Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
| LeaningEdge™ Flail Conditioner |
|
| LeaningEdge™ Flail Conditioner |
- |
| Number of LeaningEdge flails |
- |
Semi-Swinging Leaning
Edge flail design |
- |
| Rotor Diameter, in. (mm) |
- |
| Standard Speed, rpm |
- |
| Optional Slow Speed, rpm |
- |
| Drive. |
- |
| Conditioner Intensity Adjustment. |
- |
| Optional Textured Hood Liner Kit |
- |
| Attachment |
|
| Standard Drawbar |
Optional |
| Drawbar Swivel Hitch |
Optional |
| 2-pt Swivel Hitch |
Optional |
| Dimensions |
|
| Height, Transport, ft. in. (m) |
5' 8" (1.7) |
| Height, Operating, ft. in. (m) |
4' 5" (1.3) |
| Width, Transport, ft. in. (m) |
11' 3" (3.4) with standard drawbar hitch |
Width, Operating, Std.
Drawbar Hitch, ft. in. (m) |
16' 0" (4.6) |
Width, Operating 2-pt
Swivel Hitch, ft. in. (m |
- |
Width, Operating
Drawbar Swivel Hitch, ft. in. (m) |
- |
Length, Transport,
Standard Drawbar Hitch, ft. in. (m) |
17' 7" (5.3) |
Length, Transport, 2-pt
Swivel Hitch, ft. in. (m) |
19' 9'' (6.0) |
Length, Transport,
Drawbar Swivel Hitch, ft. in. (m) |
19' 9'' (6.0) |
Length, Operating,
Standard Drawbar Hitch, ft. in. (m) |
17' 2" (5.2) |
Length, Operating, 2-pt
Swivel Hitch, ft. in. (m) |
19' 4'' (5.9) |
Length, Operating
Drawbar Swivel Hitch, ft. in. (m) |
19' 4'' (5.9) |
| Weight, Operating lbs. (kg) |
4,165 (1889) |
| Drive |
|
| Drive |
540 rpm PTO, enclosed gears and four HB belt |
| Drive Protection |
|
| Drive Protection |
Slip clutch and over-running clutch |
| Hydraulics |
|
| Hydraulic swing |
Standard (double-acting cylinder) |
| Operating Position |
Side-Pull, Right Side |
| Hydraulic lift |
Standard (operated by two single-acting cylinders; master/slave) |
| Hydraulic tilt |
Optional (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge |
|
| Swath, ft. (mm) |
7 (2134 |
| Windrow, ft. (mm) |
Adjustable from 3 to 7 (914 to 2134) |
| Wide Thin Fin Kit (100 % Coverage) |
Optional |
| Speeds |
|
| Operating, mph (kph) |
0 to 9 (0 to 14.5) |
| Transport, mph (kph) |
20 (32) |
| Tractor Requirement |
|
| Tractor Requirement |
80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar |
| Hydraulic valves |
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
| Tubeless Ag Rib Implement Tires |
|
| Size |
11L x 15 6PR |
Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
Hide