Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland H7330
H7330
Discbine Disc Mower-Conditioners
BUILT FOR FAST CUTTING AND QUICK DRYDOWN
Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.
| Model | H7330 |
| New Holland-Disc Cutterbar | |
| Type | MowMax™ True Modular Disc Cutterbar |
| Width of Cut, ft. in. (m) | 10' 4" (3.2) |
| Number of discs | 8 |
| Number of knives | 16 (2 per disc) |
| Disc Speed, rpm | 3000 |
| Cutting angle | 2 to 10 degrees |
| Hydraulic Cutting angle control | Standard |
| Standard Cutting height skid shoe, in. (mm) |
Standard 0.95 to 3.2 (24 to 81) |
| Fixed Raised, high- stubble skid shoe |
Optional 2.25-4.5 (57-114) |
| Adjustable Raised, high- stubble skid shoe |
- |
| BioMass skid shoe | - |
| Ground clearance with header fully raised, in. (mm) |
17" (432) |
| Cutterbar Flotation | Vertical and lateral, adjustable springs |
| QuickMax™ Knife Change System |
- |
| ShockPro™ Disc Drive Hub protection system |
Standard |
| MowMax™ 3-year cutterbar protection plan |
Standard |
| Chevron-Design Roll Conditioner | |
| Chevron-Design Roll Conditioner | - |
| Type | - |
| Roll Length, in. (mm) | - |
| Roll Diameter, in. (mm) | - |
| Roll Drive | - |
| Roll Speed, rpm | - |
| Roll Pressure System | - |
| Conditioner Intensity Adjustment |
- |
| LeaningEdge™ Flail Conditioner | |
| LeaningEdge™ Flail Conditioner | Standard |
| Number of LeaningEdge flails | 100 |
| Semi-Swinging Leaning Edge flail design |
Standard |
| Rotor Diameter, in. (mm) | 22 (560) |
| Standard Speed, rpm | 1000 |
| Optional Slow Speed, rpm | 718 |
| Drive. | 4 HB V-belt |
| Conditioner Intensity Adjustment. | Single crank adjustable rotor hood |
| Optional Textured Hood Liner Kit | Optional |
| Attachment | |
| Standard Drawbar | Optional |
| Drawbar Swivel Hitch | Optional |
| 2-pt Swivel Hitch | Optional |
| Dimensions | |
| Height, Transport, ft. in. (m) | 5' 8" (1.7) |
| Height, Operating, ft. in. (m) | 4' 5" (1.3) |
| Width, Transport, ft. in. (m) | 11' 3" (3.4) with standard drawbar hitch |
| Width, Operating, Std. Drawbar Hitch, ft. in. (m) |
16' 0" (4.6) |
| Width, Operating 2-pt Swivel Hitch, ft. in. (m |
- |
| Width, Operating Drawbar Swivel Hitch, ft. in. (m) |
- |
| Length, Transport, Standard Drawbar Hitch, ft. in. (m) |
17' 7" (5.3) |
| Length, Transport, 2-pt Swivel Hitch, ft. in. (m) |
20' 3'' (6.2) |
| Length, Transport, Drawbar Swivel Hitch, ft. in. (m) |
20' 3'' (6.2) |
| Length, Operating, Standard Drawbar Hitch, ft. in. (m) |
17' 8" (5.4) |
| Length, Operating, 2-pt Swivel Hitch, ft. in. (m) |
19' 10" (6.0) |
| Length, Operating Drawbar Swivel Hitch, ft. in. (m) |
19' 10" (6.0) |
| Weight, Operating lbs. (kg) | 17' 8" (5.4) |
| Drive | |
| Drive | 540 rpm PTO, enclosed gears and four HB belt |
| Drive Protection | |
| Drive Protection | Slip clutch and over-running clutch |
| Hydraulics | |
| Hydraulic swing | Standard (double-acting cylinder) |
| Operating Position | Side-Pull, Right Side |
| Hydraulic lift | Standard (operated by two single-acting cylinders; master/slave) |
| Hydraulic tilt | Optional (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge | |
| Swath, ft. (mm) | 7 (2134) |
| Windrow, ft. (mm) | Adjustable from 3 to 7 (914 to 2134) |
| Wide Thin Fin Kit (100 % Coverage) | Optional |
| Speeds | |
| Operating, mph (kph) | 0 to 9 (0 to 14.5) |
| Transport, mph (kph) | 20 (32) |
| Tractor Requirement | |
| Tractor Requirement | 80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar. |
| Hydraulic valves | All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights |
| Tubeless Ag Rib Implement Tires | |
| Size | 9.5L x 14 6PR |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide