Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland H7460 (PRIOR MODEL)
H7460 (PRIOR MODEL)
Discbine Disc Mower-Conditioners
BUILT FOR FAST CUTTING AND QUICK DRYDOWN
Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.
| Conditioner | |
|
Type |
Chevron-design intermeshing molded rubber rolls |
|
Length, in. (mm) |
102 (2591) |
|
Diameter, in. (mm) |
10.4 (264) |
|
Drive |
4 HB V-belt and enclosed gears |
|
Speed, rpm |
740 |
|
Conditioner Adjustment |
Single crank adjustable roll pressure and two stop bolts to adjust roll gap |
| Dimensions | |
|
Height, Transport, ft. in. (m) |
6' 8" (2.6) |
|
Height, Operating, ft. in. (m) |
5' 8" (1.7) |
|
Width, Transport, ft. in. (m) |
15' 9" (4.8) with 2-pt swivel hitch or drawbar swivel hitch |
|
Width, Operating, ft. in. (m) |
24' 11" (7.6) with 2-pt swivel hitch |
|
Width, Operating, ft. in. (m) |
23' 3" (7.1) with drawbar swivel hitch |
|
Width, Operating, ft. in. (m) |
|
|
Length, Transport, ft. in. (m) |
30' 5" (9.3) with 2-pt swivel hitch |
|
Length, Transport, ft. in. (m) |
29' 5 in. (8.7) with drawbar swivel hitch |
|
Length, Transport, ft. in. (m) |
|
|
Length, Operating, ft. in. (m) |
25' 2" (7.7) with 2-pt swivel hitch |
|
Length, Operating, ft. in. (m) |
24' 2" (7.4) with drawbar swivel hitch |
|
Length, Operating, ft. in. (m) |
|
|
Weight, Operating lbs. (kg) |
6,500 (2948) |
| Drive | |
|
|
1000 rpm PTO, enclosed gears and four HB belt |
| Drive Protection | |
|
|
Slip clutch and over-running clutch |
| Hydraulics | |
|
Hydraulic swing |
Standard (double-acting cylinder) |
|
Hydraulic lift |
Standard (operated by two single-acting cylinders; master/slave) |
|
Hydraulic tilt |
Standard (operated by single-acting cylinder and incorporated into the lift system) |
| Material Discharge | |
|
Swath, ft. (mm) |
8 (2438) |
|
Windrow, ft. (mm) |
Adjustable from 3 to 8 (914 to 2438) |
| MowMax™Cutterbar with ShockPRO™Hubs | |
|
Number of discs |
12 |
|
Number of knives |
24 (2 per disc) |
|
Speed, rpm |
3000 |
|
Cutting width, ft. in. (mm) |
15' 7" (4795) |
|
Cutting angle |
2 to 10 degrees, hydraulic control |
|
Cutting height, in. (mm) |
0.95 to 3.2 (24 to 81) with standard skid shoes |
|
Ground clearance with header fully raised, in. (mm) |
18 (457) |
|
Flotation |
Vertical and lateral, adjustable springs |
| Speeds | |
|
Operating, mph (kph) |
0 to 9 (0 to 14.5) |
|
Transport, mph (kph) |
20 (32) |
| Tractor Requirement | |
|
|
100 PTO hp (74.5 kW) or greater with Category III drawbar or Category III 3-point hitch. |
|
|
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights. |
| Tubeless Ag Rib Implement Tires | |
|
Size |
31 x 13.5-15 |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide