Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland DuraSwath™ 440 HB
DuraSwath™ 440 HB
Windrower Headers
MORE HIGH-PERFORMANCE HEADERS
Powerful Speedrower® SP Windrowers allow you to drive a wide variety of high-performance headers. Choose from two powerful disc headers—the Durabine™ 416 with a 16’ 1” cut, or the Durabine™ 419 with an industry-widest 19’ 4” cut. New Holland offers a large selection of draper headers—from 25 to 40 feet wide. Haybine® sicklebar headers have a legendary history of top cutting and conditioning performance, and are available with a 14, 16 or 18foot cut.
| Model | DuraSwath™ 440 HB |
| Header drive | |
| Cutting width ft. in. (m) | 40 (12.2) |
| Overall width ft. in. (m) | - |
| Approximate weight lbs. (kg) | 7300 (3311) includes reel |
| Versions available | Double-knife drive, single swath, split reel |
| Windrow/swath width in. (mm) | 56 - 72 (1420 - 1830) center delivery windrow width |
| Cutterbar | |
| Cutterbar type | SCH ProDrive system; hydraulically-driven, planetary-reduction sickle drive, NH cutting system w/Standard or Stub Guards, or Schumacher (EasyCut) |
| Knives | - |
| Knife speed | 1400 SPM |
| Sickle stroke in. (mm) | 3.35 (85) |
| Flotation | - |
| Cutting angle and height, degrees, in (m) | Minimum 0.75 (19) @ 8 degrees tilt |
| Header ground clearance - bottom of skid shoes in. (mm) | 47 (1200) w/tilt cyl. fully retracted; 43 (1100) w/tilt cyl. fully extended |
| Reel | |
| Reel Choices (SF = steel fingers, PF = plastic fingers) | UII, 6-bat, split, w/PF; HCC, 6-bat, flipover, w/PF |
| Speed range rpm | 10 – 75 |
| Drive | Single reels equipped with single, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motor; Split reels equipped with two, hydraulic-driven, chain-and-sprocket reduction drive w/15.9ci (260cc) motors |
| Raptor Draper Belts | |
| Belt width and construction | 42 in. (1.07 m) rubberized polyester belt with fiberglass reinforcement, tie bar end connection |
| Belt/roller guide design | V-guide on upper end of inner side of belt with V-groove in rollers |
| Roller design | Rubber vulcanized steel drive roller, steel idler roller |
| Speed range ft. (m) | 0 - 760 (0-232)/minute |
| Cleat design and height in. (mm) | 1/2" (13) high cleat, w/embedded fiberglass reinforcement |
| Chaff barrier seal design | Continuous, 1/2" height, rubber, inverted 'V' barrier on front edge of outside of belt, w/minimal clearance to draper guard |
| Belt angle degrees (@minimum cutterbar tilt) | 15 @ 2 degrees tilt |
| Auger | |
| Type | - |
| Maximum diameter in. (mm) | - |
| Flighting depth in. (mm) | - |
| Conditioner (Rolls) | |
| Type | - |
| Length in. (m) | - |
| Roll speed rpm | - |
| Roll pressure | - |
| Roll gap | - |
| Conditioner (Flails) | |
| Length in. (m) | - |
| Speed rpm | - |
| Hood position | - |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide