Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland Durabine™ 416
Durabine™ 416
Windrower Headers
MORE HIGH-PERFORMANCE HEADERS
Powerful Speedrower® SP Windrowers allow you to drive a wide variety of high-performance headers. Choose from two powerful disc headers—the Durabine™ 416 with a 16’ 1” cut, or the Durabine™ 419 with an industry-widest 19’ 4” cut. New Holland offers a large selection of draper headers—from 25 to 40 feet wide. Haybine® sicklebar headers have a legendary history of top cutting and conditioning performance, and are available with a 14, 16 or 18foot cut.
| Model | Durabine™ 416 |
| Header drive | |
| Cutting width ft. in. (m) | 16’ 1” (4.9) |
| Overall width ft. in. (m) | 16' 4" (4956) |
| Approximate weight lbs. (kg) | 4700 (2132) |
| Versions available | - |
| Windrow/swath width in. (mm) | 38 to 96 (965 to 2438) |
| Cutterbar | |
| Cutterbar type | 10-disc modular disc cutterbar, 2500-rpm max disc speed |
| Knives | 20 reversible, swing-away knives (2 per disc) |
| Knife speed | 181-mph(291-kph) knife tip speed |
| Sickle stroke in. (mm) | - |
| Flotation | Hydraulic adjustment from windrower cab |
| Cutting angle and height, degrees, in (m) | Standard hydraulic control, from 0 to -10 degrees / 0.7 to 3.5 (18 to 89) with standard skid shoes* |
| Header ground clearance - bottom of skid shoes in. (mm) | 27 (686)* |
| Reel | |
| Reel Choices (SF = steel fingers, PF = plastic fingers) | - |
| Speed range rpm | - |
| Drive | - |
| Raptor Draper Belts | |
| Belt width and construction | - |
| Belt/roller guide design | - |
| Roller design | - |
| Speed range ft. (m) | - |
| Cleat design and height in. (mm) | - |
| Chaff barrier seal design | - |
| Belt angle degrees (@minimum cutterbar tilt) | - |
| Auger | |
| Type | Floating |
| Maximum diameter in. (mm) | 20 (508) |
| Flighting depth in. (mm) | 7 (178) |
| Conditioner (Rolls) | |
| Type | Chevron-design, intermeshing molded rubber, steel or high-contact rolls |
| Length in. (m) | 102 (2.6) |
| Roll speed rpm | 938 |
| Roll pressure | Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass |
| Roll gap | Adjustable stop bolt |
| Conditioner (Flails) | |
| Length in. (m) | 90 (2.3) |
| Speed rpm | 1310 |
| Hood position | Adjusted with a single crank |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide