Fremont, OH
419-334-9775
M-F 8:00 a.m - 5:00 p.m
New Holland Workmaster 75 2WD
Workmaster 75 2WD
Workmaster Utility Tier 3
Ample power and a durable design make routine chores and ambitious projects easy. Four WORKMASTER™ models let you choose between 45, 55, 65 or 75 engine horsepower, that offer a quiet start-up and smooth, fuel-efficient operation. Tier III emission compliant engines protect the environment and give you the flexibility to run on B5 biodiesel blends (WORKMASTER 45 and 55) or B20 biodiesel (WORKMASTER 65 and 75).
|
Model |
Workmaster 75 2WD |
| Engine | |
|
Type |
4-cylinder, diesel |
|
Number of cylinders / Aspiration |
4 / turbo |
|
Displacement, cu. in. (l) |
195 (3.2) |
|
Gross engine power, hp (kw) |
75 (56) |
|
PTO horsepower, hp (kw) |
65 (48.5) |
|
Rated speed (rpm) |
2500 |
|
Fuel type |
Standard diesel fuels or B20 Biodiesel (meeting ASTM 6751 standards) |
|
Air filter |
Dual element, dry type with cleanable outer element and replaceable inner safety element |
|
Lubrication |
Full flow, pressure lubrication with spin-on filter cartridge |
|
Emissionization standard |
Tier III |
|
Fuel tank capacity, gal (l) |
16.0 (60) |
| Transmission | |
|
Traction clutch |
Dry, 11-inch (279.4 mm) diameter organic plate |
|
Transmission Type |
8Fx2R with 4 (2 synchronized) gears and 2 constant mesh ranges |
|
Ground Speed |
Forward - 1.9 to 19.0 MPH (3 to 30.5 kph); Reverse - 2.6 to 9.5 MPH (4.1 to 15.3 kph) |
|
* Tire size |
11.2 X 24, 6PR (R1) |
|
** Tire size |
16.9 X 30, 6PR (R1) |
| Brakes | |
|
Service brakes |
Individual mechanically actuated wet disc |
|
Parking brake |
Engage hand-lever, press brake pedals to lock service brakes |
| Rear Axle | |
|
Rear differential lock |
Mechanical foot pedal engagement |
| Front Axle | |
|
Front differential lock |
N/A |
|
FWD clutch engagement |
N/A |
|
Maximum turn angle |
52 degrees |
| Hydraulics | |
|
System type |
Open center, fixed displacement gear pump |
|
Implement pump capacity, gpm (lpm) |
10.4 (39) |
|
Steering & services system, gpm (lpm) |
Hydrostatic power steering w/dedicated gear pump 8.3 (32) |
|
Total maximum tractor flow, gpm (lpm) |
18.7 (71) |
|
Remote valves |
1 Standard open center, rear mounted, color coded lever controls with quick coupler dust covers. Second rear remote is optional. |
|
Loader control valve (optional) |
|
| Rear Hitch | |
|
Rear 3-Point Hitch |
Standard |
|
Category |
II, convertible to I |
|
Position control, Draft sensing |
One lever, mechanical draft control |
|
OECD lift capacity @ 24” behind ball ends, lbs (kg) |
2,429 (1102) |
| Rear PTO | |
|
Rear PTO |
Standard Independent 540-RPM, w/ flip-up PTO shaft guard |
|
Engagement |
One lever, mechanical engagement |
| Electrical | |
|
Alternator |
12 Volt, 65 Amp |
|
Battery capacity (cold cranking amps) |
800 |
|
Lighting |
2 hi/lo beam halogen headlights, flashing safety lights / turn signals |
|
Accessory power outlets |
Standard equipment, 7-pin implement outlet |
| General | |
|
ROPS |
Foldable |
|
APPROX SHIPPING LENGTH, in (mm) |
137.2 (3483) |
|
APPROX SHIPPING WIDTH, in (mm) |
78.4 (1990) |
|
APPROX SHIPPING HEIGHT, in (mm) |
95.3 (2420) |
|
APPROX SHIPPING WEIGHT, lbs (kg) |
5,059 (2295) |
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hide